Page of 1
    Dirt Bike
  • Akront Rims, 1:12 Scale

    Akront aluminum rims include a tall rib on both sides for strength. They were popular on dirt bikes, street bikes and even some dragsters in the 60's and 70's. These are 1:12 scale replicas cast in high strength resin from machined aluminum masters. They include pilot holes for 36 spokes, valve stem, and rim locks. There is a groove around the outside diameter for spoke lacing wire. Includes two rims representing an 18" rear and 21" front. (Actual dimensions: 1.550" and 1.820" O.D.). For advanced modelers only. Calnaga will not be responsible for poor quality or frustration resulting from attempts to create scale spoked wheels with these rims.

    $10.00
  • Husqvarna 400 CR tank

    This is the original gas tank from the Revell Malcolm Smith 400cc Moto Cross kit. Later releases replaced this stock tank with an aftermarket desert tank. This is the one you need if you are doing a stock Husqvarna CR. 1/12 scale.

    $4.00
  • Husqvarna 400 Cross Conversion Set, 1:12 Scale

    These are the engine side covers and tank you need to convert Revell's Baja Husky or Malcom Smith Husqvarna into a 400 Cross model. The 400 Cross was ridden by Steve McQueen in the movie, "On Any Sunday." Bonus! You also get the Husqvarna air cleaner that has been turned with a cylindrical shape to eliminate the unrealistic draft angle.

    $12.00
  • Tire Machining Service

    Calnaga offers you the option of having your resin tires machined to a specific inner diameter (ID) of your specification, within the material limits of the tire castings. Let us know your requested tire inner diameter based on the diameter of the wheels you plan to use and we will turn the ID of the tires to match within +/- 0.005" of your specification. Service charge covers machining for two tires. Available for 1:12 and 1:25 scale dirt bike or car tires. Include your tire inner diameter specification in the comments section of your order.

    $12.50
  • Tire Set, Dirt Bike Knobby, Modern, 1:12 Scale

    Knobby dirt bike tires in 1:12 scale for 4.50 x 18" rear and 3.00 x 21" front. Open block pattern is good for contemporary dirt bikes. Mastered from a high quality Japanese dirt bike kit. Cast in black resin. Requires some flash cleanup.

    $9.00
  • Tire Set, Dirt Bike Knobby, Open Class

    The most realistic knobby tire you will find in 1:25 scale, these knobby's were custom-shaped for realism on scale dirt bikes. Includes one 4.00x18" rear tire and one 2.75x21" front tire. The inner diameters are accurately machined to the scale dimensions; of 0.720" and 0.840" respectively. Rat Rodders take note: The dirt bike knobbys could make a wicked set of front tires for your next build. Orders of two of the same size in your set are available upon request.

    $7.00
  • Tire Set, Dirt Bike Knobby, Trail/250cc

    This set of knobby tires feature the same realistic tread pattern as the Open Class set, but they're a little smaller for the lower displacement machines. Includes one 3.50x18" rear tire and one 2.75x 19" front tire. Actual inner diameter size 0.720" and 0.760" respectively.

    $7.00
  • Tire Set, Dirt Bike Knobby, Vintage, 1:12 Scale

    Knobby dirt bike tires in 1:12 scale for 3.50 x 18" rear and 2.75 x 19" front. Front can be machined to 21". Tight block pattern is good for older dirt bikes such as the Revell Yamaha 250 MX or Baja Husky. Cast in black resin. Requires some flash cleanup.

    $9.00

HomeOur MissionAbout UsStoreGalleryNewsPoliciesContact Us

Calnaga Castings
The Calnaga Store