Page of 1
    Tires
  • Tire Pair, 11.75" Drag Slick, wrinkle wall

    A modification of the M&H drag slick. The thin raised whitewall line has been maintained, even through the wrinkled section. Unlike some kit wrinkle walls, these have the folds in the correct direction on both sides of the tire, so they will look good on both sides of the car.

    $7.00
  • Tire Pair, 12" BFG Radial T/A

    We expanded the width of the BFG Radial T/A to create a cool 12" version that will look great on the rear of street machines and street rods. White resin casting allows you to paint the tire black and sand off the lettering for a great look. Match them up with our Tire Set, 9" BFG Radial T/A for the big and little look. Two tires provided in white resin.

    $7.00
  • Tire Pair, 12"x28" M&H Racemaster

    M&H Racemaster slicks for your sportsman drag car. 12" tread width and 28" outer diameter. This tire fits typical kit 15" wheels including MPC and Calnaga. You chose the sidewall lettering, the big "M&H" logo from the 80's or "M&H Racemaster" from the 70's. You get two tires supplied in white resin.

  • Tire Pair, 16" Drag Slick, Goodyear

    Calnaga's 16 inch drag slick features a correct scale 16 inch width and realistic bulging sidewall and tire surface contours. No halves to glue together and no mold seams to sand down or fill. The wheel opening will fit 15 inch wheels like those in MPC dragster kits or Calnaga's Halibrand slot mag. They can easily be sanded larger with Calnaga's exclusive wheel mounting surface ribs to fit 16" wheels, such as Revell's Cragar Super Trick wheels. These are the perfect tires for your Revell 70's funny car. Actual size: ID: 0.630"/0.660", OD: 1.300", tread width:0.640". Molded in white resin.

    $7.00
  • Tire Pair, 16" Drag Slick, wrinkle wall

    This 16" wrinkle wall drag slick is great for Funny Cars and Top Fuel cars from the 70's. The wrinkles face only one direction on both sides of the tire, so you can use them on both sides of the the car with a realistic wrinkle. They have smooth sidewalls and no lettering. We mold them in black resin.

    $7.00
  • Tire Pair, 16"x32" Slick, M&H Racemaster

    Realistic 16" slicks for your funny car or fueler with your choice of the "Racemaster" or big letter "M&H" sidewall. You also chose the wheel size: Revell Funny Car 16" wheel or MPC 15" wheel. Revell wheel shown, you get two tires molded in white resin.

  • Tire Pair, 9" BFG Radial T/A

    The classic BFG Radial T/A in white resin allows you to paint the tire black and sand off the lettering for a great look. Many finishes can be created, but we like Tamiya Rubber Black as a starting point. Order two pairs for a full car set or match them up with our Tire Set, 12" BFG Radial T/A for the big and little look. Two tires provided in white resin.

    $7.00
  • Tire Pair, Funny Car Front

    Modeled after the iconic Goodyear Frontrunner in the correct 24x5-15 size used on funny cars from the 70's to present day. They have four accurate zig-zag grooves and nice bulging sidewalls so they look mounted and inflated on the wheel. They were carefully engineered to fit wheels from early and late Revell funny cars, Polar Lights and Jo-Han funny cars, and Monogram pro-stockers.

    $7.00
  • Tire Pair, L60 Goodyear Polyglas

    This is a very common kit tire, and it is even available with tampo-printed lettering in a parts pack, but vinyl tires have an unrealistic look and can't be painted effectively. This white resin tire can be painted with your choice of finishes; shiny and new, worn, or old and grungy. We like Tamiya Rubber Black as a starting point, but you can mix up your preferred tone and gloss. Then sand off the lettering for truly raised white letters, a big step up in realism from those kit tires. Two tires supplied in white resin.

    $7.00
  • Tire Set, Pro-Stock, Firestone Drag 500

    These are the Firestone Drag 500's found in the Jo-Han Sox and Martin Pro-Stock Barracuda, but they have been assembled, filled, and sanded to save you a ton of work. Getting your tires in white resin allows you to sand off the black paint to get near-perfect sidewall lettering. No decal film to hide or clear coating is needed, no fussy hand-painting or stencils to deal with. This is the way to go, and it gets you away from those same old Goodyear slicks to add some real technical interest to your drag subject. Actual size: Rear: outer diameter; 1.130", inner diameter; 0.610", tread width; 0.480" (12" in 1:25 scale) Front: outer diameter; 1.075", inner diameter; 0.610", tread width; 0.240"

    $12.00

HomeOur MissionAbout UsStoreGalleryNewsPoliciesContact Us

Calnaga Castings
The Calnaga Store